Remote Control Unit - JVC GR-DVM1DU Instructions Manual

Remote Control Unit

You can use the RM-V708U to control the camcorder when it's attached to the Docking Station.
PAUSE IN connector (
ZOOM Buttons (
DISPLAY Button (
SHIFT Button (
SLOW Rewind/Forward
Buttons ( pg. 53)
LEFT/RIGHT Buttons
( pg. 56)
FADE/WIPE Button
( pg. 60)
EFFECT Button
( pg. 57)
EFFECT ON/OFF
Button (
Knob
RECORDING START/STOP Button (
pg. 60)
pg. 56)
pg. 65)
T
pg. 56)
pg. 57)
CANCEL Button ( pg. 61)
POWER ON/OFF Button
When the camcorder's Power
Dial is set to "PLAY", you can
turn the unit's power on and off
using the RM-V708U.
W
R.A. EDIT Buttons (
Installing The Battery
The RM-V708U uses one lithium battery (CR2025).
1
PULL OUT BATTERY HOLDER
Pull out in the direction of the arrow while
pressing the knob as shown.
2
INSERT BATTERY IN HOLDER
Insert the battery in the holder, and be sure to
have the "+" mark visible.
3 RE-INSERT HOLDER
Slide the holder back in until you hear a click.
pg. 66)
AUDIO MONITOR
Button ( pg. 65)
MBR SET Button ( pg. 59)
A. DUB Button ( pg. 65)
DOWN Button ( pg. 56)
INSERT Button ( pg. 66)
UP Button ( pg. 56)
Operation Buttons
( pg. 56, 66)
pg. 60)
17