Table of Contents
Advertisement
26
Snapshot
Use your camcorder like a regular camera and take a snapshot, or several of them in succession.
LCD monitor
PUSH-OPEN
SNAPSHOT
1
OPEN LCD MONITOR
Press the PUSH-OPEN switch and open the
LCD monitor fully.
2
SELECT OPERATION MODE
Press the lock button located on the Power
Dial and turn the Power Dial to "REC", "5S" or
"
".
3
TAKE SNAPSHOT
Press the SNAPSHOT button. "PHOTO"
appears in the LCD monitor, and the image,
bordered by a white frame, will be recorded
and displayed in the LCD monitor for 6
seconds. The next image then gradually
overlaps the snapshot and normal recording
resumes.
• When using the Snapshot function from
Record/Standby, the camcorder returns to
Record/Standby after 6 seconds.
• The sound effect of a shutter closing is
recorded together with the image.
Speaker
Press SNAPSHOT during recording
Press SNAPSHOT during Record/Standby mode
RECORDING
Power Dial
Motor Drive mode:
Keeping SNAPSHOT pressed provides an effect
similar to serial photography. (The interval between
the still pictures: approx. 0.7 seconds)
Changing the Snapshot Setting:
•Still image with no frame can also be recorded
(
pg. 32).
•When you don't want to hear the shutter sound,
set BEEP/TALLY to "NO" in the system menu
(
pg. 32). Though the sound is not heard from
the speaker, it is recorded on the tape.
Advanced Features
Lock button
Hide quick links:
Advertisement
Table of Contents
