Bang & Olufsen BeoVision 10 Manual page 40

40
Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic, and the
double-D symbol are registered trademarks of
Dolby Laboratories.
Confidential unpublished works.
Copyright 1992–2003 Dolby Laboratories.
All rights reserved.
Manufactured under
license under U.S. Patent #'s: 5,451,942;
5,956,674; 5,974,380; 5,978,762; 6,487,535;
7,003,467; 7,212,872 & other U.S. and
worldwide patents issued & pending.
DTS, DTS Digital Surround, ES, and Neo:6 are
registered trademarks and the DTS logos, and
Symbol are trademarks of DTS, Inc.
© 1996-2008 DTS, Inc.
All Rights Reserved.
This product is in conformity with
the provisions of the Directives
2004/108/EC and 2006/95/EC.
This product incorporates copyright protection
technology that is protected by U.S. patents and
other intellectual property rights. Use of this copy-
right protection technology must be authorized by
Rovi, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Rovi. Reverse engineering or disassembly is
prohibited.
HDMI, the HDMI logo and High-Definition Multi-
media Interface are trademarks or registered
trade marks of HDMI Licensing LLC.
For the US-market only!
NOTE: This equipment has been tested and found
to comply with the limits for a class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harm ful interference in a
residential installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equip ment off
and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment
and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
– Consult the retailer or an experienced radio/TV
technician for help.
For the Canadian market only!
This class B digital apparatus meets all require-
ments of the Canadian Interference-Causing
Equipment Regulations.