Resetting The File Name; Protecting Files - JVC GR-D850U Instructions Manual

Resetting The File Name

By resetting the fi le name, a new folder will be
made. The new fi les you are going to make will
be stored in the new folder. It is convenient to
separate the new fi les from previously made
fi les.
1 1 1
Perform steps –
Of Images" ( 24).
2
Press MENU.
3
Select "MEMORY CARD" ( ).
4 4
Select "NO.RESET", press SET. The NO.
RESET screen appears.
5 5
Select "EXECUTE", press SET. The new
folder (such as "101JVCGR") will be made
and the fi le name of the next shot starts
from DVC00001.
Note:
If the file name reaches DVC09999, a new folder
(such as "101JVCGR") will be made and the
fi le name will start again from DVC00001.

Protecting Files

The Protect mode helps prevent the accidental
erasure of fi les.
1 1 1
Perform steps –
Of Images" ( 24).
2
Press MENU.
3
Select "MEMORY CARD" ( ).
4 4
Select "PROTECT", press SET. The
PROTECT menu appears.
• Press £ whenever you want to return to the
previous menu screen.
To protect the currently displayed fi le
5 5
Select "CURRENT", press SET. The
PROTECT screen appears.
6 6
Press £ or ¤ to select the desired fi le.
3 3
in "Normal Playback
3 3
in "Normal Playback
D.S.C. Recording & Playback
7 7
Select "EXECUTE", press SET.
• To cancel protection, select "RETURN".
6 6
• Repeat steps
want to protect.
To protect all fi les stored in the memory
card
5 5
Select "PROT.ALL", press SET. The
PROTECT screen appears.
6 6
Select "EXECUTE", press SET.
• To cancel protection, select "RETURN".
Note:
If the "x" mark appears, the currently displayed
file is protected.
To Remove Protection
Before doing the following, perform steps
1 4 4
– in "Protecting Files".
To remove protection from the currently
displayed fi le
5 5
Select "CURRENT", press SET. The
PROTECT screen appears.
6
Press £ or ¤ to select the desired fi le.
7 7
Select "EXECUTE", press SET.
• To cancel selection, select "RETURN".
6 6
• Repeat steps
remove protection.
want to
To remove protection from all fi les stored
in the memory card
5 5
Select "CANC.ALL", press SET. The
PROTECT screen appears.
6 6
Select "EXECUTE", press SET.
• To cancel selection, select "RETURN".
EN
7 7
for all fi les you
and
7 7
and for all fi les you
25