Connection To A Personal Computer - JVC GR-D850U Instructions Manual

42
Connections/Editing
EN
Connection To A Personal
Computer
USB connector
USB Cable
(provided)
To USB
connector
PC with DV connector
When connecting the camcorder to a PC
using a DV cable, make sure to follow the
procedure below. Connecting the cable
incorrectly may cause malfunctions to the
camcorder and/or the PC.
• Connect the DV cable fi rst to the PC, and
then to the camcorder.
• Connect the DV cable (plugs) correctly
according to the shape of the DV connector.
[A] Using USB cable
It is possible to transfer still images stored on
a memory card to a PC.
DV connector
[A]
[B]
Core fi lter
DV cable
(optional)
or
Core fi lter
To DV
Connector
[B] Using DV cable
It is also possible to transfer still/moving
images to a PC with a DV connector by using
the provided software, software
equipped with the PC or commercially
available software. If you are using a
®
Windows XP, you can use Windows
Messenger to conduct video conferences over
the Internet, using a camcorder. For details,
refer to the help for the Windows
Notes:
• Refer to "SOFTWARE
INSTALLATION AND USB CONNECTION
GUIDE" for the bundled software and drivers.
• It is recommended to use the AC Adapter
as the power supply instead of the battery
pack ( 16).
• Never connect the USB cable
and the DV cable simultaneously to the
camcorder. Connect only the cable you
wish to use to the camcorder.
• When using a DV cable, be sure to use the
optional JVC VC-VDV206U or VC-VDV204U
DV cable depending on the type of DV
connector (4 or 6 pins) on the PC.
• If the PC connected to the
camcorder via the USB cable is not powered,
the camcorder does not enter the USB mode.
• The date/time information cannot be captured
into the PC.
• Refer to the instruction manuals of the PC and
Software.
• The still images can also be
transferred to a PC with a DV connector-
equipped capture board.
• The system may not work properly depending
on the PC or capture board you are using.
• If, after connecting a DV cable to the
camcorder and it doesn't work, restart the
camcorder.
• Do not remove memory card during
USB connection between PC and set.
"USB" and/or "
LCD monitor while the PC is accessing
data in the camcorder or the camcorder is
transferring a fi le to the PC.
NEVER disconnect the USB cable
while " " is displayed on the LCD
monitor since this can result in product
damage.
®
® Messenger.
" appears on the