File Format Converter; Ieee1284 - Ricoh D009 Service Manual

Other Options

1.3.3 FILE FORMAT CONVERTER

Unplug the main machine power cord before you do the following procedure.
1. Remove the slot cover [1] from the board slot (
2. Install the file format converter into the board slot, and then fasten it with screws.
3. Plug in and turn on the main power switch.
4. Check or set the following SP codes with the values shown below.
SP No.
SP5-836-001
SP5-836-002
5. Check the operation.
6. Make sure that the machine can recognize the option (
the end of this section).

1.3.4 IEEE1284

Installation Procedure
Unplug the main machine power cord before you do the following procedure.
You can only install one of the following network interfaces at one time: (IEEE 802.11a/g, g
(Wireless LAN), IEEE1284, Bluetooth).
D381
Title
Capture Function (0:Off 1:On)
Panel Setting
16
x 2).
Setting
"Check All Connections" at
"1"
"0"
SM