Engine Connections - MerCruiser GM4 Service Manual

f. When alignment is correct, tighten locknut or
nut with lockwasher on each mount securely.
c
d
b
a - Front Mount
b - Attaching Bolts and Flat Washers
c - Adjustment Nut
d - Locknut
e - Jam Nut
g. Remove alignment tool if not already re-
moved.
8. Tighten all exhaust system hose clamps securely
as follows (use two hose clamps on each connec-
tion):
a - Hose Clamps
Index
2A -8 REMOVAL AND INSTALLATION
e
a
b
22054
a
50633

Engine Connections

IMPORTANT: When routing all wire harnesses
and hoses, be sure they are routed and secured
to avoid coming in contact with hot spots on en-
gine and avoid contact with moving parts.
1. Connect seawater hose to water tube at gimbal
housing with hose clamp. Tighten clamp securely.
a
a - Water Inlet Tube
b - Hose Clamp
c - Seawater Inlet
c
b
72614
90-816462 2-695