Usb Board - HP ProBook 6565b Maintenance And Service Manual

USB board

Description
USB 2.0 board (includes Mylar)
Before removing the USB board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Bottom door (see
b. Hard drive (see
c. Optical drive (see
d. WLAN module (see
e. WWAN module (see
f. Fan (see
g. Heat sink (see
h. Keyboard (see
i. Top cover (see
j. Function board (see
k. System board (see
Remove the USB board:
1. Position the computer upside-down with the front toward you.
Battery on page
Bottom door on page
Hard drive on page
Optical drive on page
WLAN module on page
WWAN module on page
Fan on page 65)
Heat sink on page
Keyboard on page
Bottom cover on page
Function board on page
System board on page
41).
47).
52)
48)
59)
57)
66)
71)
73)
82)
83)
Component replacement procedures
Spare part number
658141-001
87