Right Wing Panel - Skyshark Ilyushin IL-2 Sturmovik Manual

Glue two S13's together to create a 1/2" thick piece. Repeat
for the other two.
Glue the S13 assemblies to the stab as shown.
Sand the S13 piece flush with the stab and round the leading
edge.

Right Wing Panel:

Glue a W2A to each side of W2 as shown. You will make two
W2 ribs total.
Glue W2B to each W2A. This will create a pocket for the
wing dowel. Repeat for the other W2.
Use 5 min epoxy to glue W6A to W6. Make a left and right
Epoxy W8A to W8. Make a left & right
Epoxy W9A to W9. Make a left & right
Epoxy W13A to W13. Make a left & right