Advertisement
If you already haven't done so, paint cockpit and F25,F26 as
shown.
Testors Model Master colors are as follows:
Base color: Gray (RLM02 Grau)
Black: Flat Black FS37038
Red: Insignia Red FS31136
Leather: Leather or Dark Tan FS30219
Silver: Chrome silver or Steel
You can use a product called "Rub n Buff" to add weathering
to the seat and panels.
Glue C52 to the center of C51.
Install C21 & C22 in the cockpit floor in the slots between for-
mers F8 & F9.Insure they are set at 90 degrees from the
floor.
Align & glue C23 & C24 on C21 & C22 as shown. You may
need to wet these pieces with water or ammonia in order to
get them to conform to the curve.
Align C48 to the top of C21 & C22 and glue on the scribed
lines. Glue C49 to C48 as shown.
Paint C60 silver and glue to C23 & C24 on the scribed lines.
Advertisement
