Porter-Cable PC186CS Manual page 11

serious personal injury. Never use the saw if the
lower guardis missing, damaged, mis-assembled or
not working properly. Do not rely on the lower blade
guard to protect you under all circumstances. Your
safety depends on following all warnings and
precautions as well as proper operation of the saw.
Check lower guard for proper closing before each
use as outlined in Additional Safety Rules for
Circular Saws. If the lower blade guard is missing or
not working properly, have the saw serviced before
using. To assure product safety and reliability,
repair, maintenance and adjustment should be
performed by anauthorized service center or other
qualified service organization, always using
identical replacement parts.
WARNING:
CAUTION:
SWITCH
AUTOMATIC ELECTRIC BRAKE
OPERATING THE LASER (CATALOG NUMBER
PC186CSL ONLY)
INSTALLING THE BATTERIES - FIGURE N
WARNING: LASER RADIATION. BE CERTAIN THE
LASER ON/OFF BUTTON IS IN THE OFF POSITION (SEE
SECTION "SWITCHING THE LASER ON AND OFF)
BEFORE INSTALLING BATTERIES.
WARNING: Batteries can explode, or leak, and
can cause injury or fire.
ON BOARD LASER
WARNING: LASER RADIATION. Never aim the
beam at a workpiece with a reflective surface.
DANGER: LASER RADIATION. AVOID DIRECT EYE
EXPOSURE. Do not stare into the laser light source.
Never aim light at another person or object other
than the workpiece.
WARNING: DO NOT use tinted glasses to
enhance the laser light.
ENGLISH
figure N
12