RED ONE Operation Manual page 90

NOTE: If you choose to upgrade later, the camera will continue to operate on the current firmware
version.
12. Push joystick in or down to begin upgrade procedure. Camera LCD will display "Upgrading..." and all
monitor outputs will display:
13. After the upgrade completes (approx. 5 minutes), camera LCD will display "OK. Cycle Power" and all
monitor outputs will display:
14. Cycle the camera OFF and back ON to return to normal operation. During the camera power up
process, the camera will display the camera P.I.N and the upgraded firmware Build and Version num-
ber.
88 88
R E D O N E O P E R A
R E D O N E O P E R A
T T M M
©2009 RED.COM INC.
T I O N G U I D E
T I O N G U I D E
VERSION 20.1.3
AUGUST 5, 2009