Fujitsu 9811 ATB Operator's Manual page 11

LCD message
Image print err.
unregistered nr
Image print err.
vert. dir size
Image print err.
vert. dots ill.
Image print err.
vertical coor.
Image print err.
vertical size
Image print err.
vertical size
Incorrect field:
xx
(xx: field number)
In non SCN mode
SCN command rec.
Invalid command
Invalid stock
ctrl nr read
MS encode data
format error
MS encode horiz.
format error
No Background
No mag pos
defined:xx
(xx: element Number)
No medium
Available
No separator
Object missing:
PECTAB memory
full
PECTAB not
available :xx
(xx: PECTAB number)
Print buffer
overflow (INT.)
Program load
fault
Registration area
full
Sequence check
error
Sequence error
Too many coupons
in one job
Undefined command
Wrong document
type:
Wrong element
LED B.Z. C.f. E-Code
ERROR ON S A-7154
ERROR ON S A-7159
ERROR ON S A-7158
ERROR ON S A-7155
ERROR ON S A-7150
-- - S -
-- - S -
ERROR ON S A-7010
ERROR ON S A-7002
-- - S -
ERROR ON O/H A-7110
ERROR ON O/H A-7112
-- - S -
-- - S -
ERROR ON S A-7005
-- - S -
-- - S -
-- - S -
-- - S -
-- - S -
E-
-- - S
3050-60 Check the down line loading data.
ERROR ON S A-7003
-- - S -
ERROR ON S A-7007
-- - S -
ERROR ON S A-7001
-- - S -
-- - S -
10
Continued 3.Received Data and Software Errors
Description
Image print error occurred. Specified number is not yet registered.
Check the host data.
Image print error occurred. The vertical direction size of an image
is illegal.
Check the LOGO data.
Images print error occurred. The vertical direction size of an image
is illegal..
Check the LOGO data.
Image print error occurred. Vertical coordinates of the image
illegal.
Check the host data.
Image print error occurred. Vertical direction size exceeds 612 dots
during editing bit map image of character print data on a
document.
Check the host data.
Image print error on vertical size occurred.
Check the host data.
Incorrect field exists.
Check the ticketing data.
During non-control mode of SCN, the SCN read command is
received.
Check the host data.
Firmware internal error occurred.
Call the maintenance personnel.
Invalid stock control number was read.
Check the ticket.
MS encode data format error (verify error).
Check the magnetic stripe or clean the magnetic head.
MS encode horizontal format error (parity check error).
Check the magnetic stripe or clean the magnetic head.
No Background (template) data available. (AEA response)
Check host data.
No magnetic position defined in PECTAB table when the steering
command is defined "check-in", "boarding" or "revalidation" in the
table.
Check host data.
No medium is available in escape path.
Check the medium is in escape path.
No separator available.
Check host data.
Object in background (ten plates) was not found out.
Check host data.
PECTAB memory is full.
Cancel unnecessary PECTAB data.
PECTAB is not available.
Check the host data.
The ticketing data is too large.
Check the ticketing data.
Program down line loading data is wrong.
Registration area full. No empty registration area for an
Image data registration command (quantity and size).
Cancel unnecessary PECTAB data.
Out of sequence in check-in or revalidation mode.
Check the host data.
Firmware internal error occurred.
Call maintenance personnel.
Too many coupons are in one job.
Check the host data.
Firmware internal error occurred.
Call maintenance personnel.
Wrong document type selected.
Check the host data.
Wrong element used.
Check the host data.
Operating the Printer
Recovery