Table of Contents
Advertisement
LCD message
Exit hopper full
Host check-in
started.
Inserted doc.
pulled out
Jam in prefeed1
Jam in prefeed2
Jam in prefeed3
JAM at path from
MS to print area
JAM at path from
inserter
JAM at ejc. Path
to inserter
JAM at path to
escape area
JAM error
during print
JAM at ejc. Path
to exit hopper
JAM occurred.
MS read error
No data on MS
Off line
Please pull out
ticket.
Print
successful
Ready to accept
ticket...
Receive error
occurred
Ribbon end
Ribbon near end
Ribbon not
installed
Ribbon installed
Ribbon wind error
Ticket JAM
TKT inserted
do revalidation.
Ticketing
started
Too many
MS encode retrys
Too many stock
nr read errors
Transmit error
Occurred
LED
B.Z. C.f.
E-Code
ERROR
ON
O
A-8500
-
-
-
ERROR
ON
O
A-810B
ERROR
ON
H
A-8101
ERROR
ON
H
A-8102
ERROR
ON
H
A-810C
ERROR
ON
H
A-8103
ERROR
ON
H
A-8104
ERROR
ON
H
A-8105
ERROR
ON
H
A-8106
ERROR
ON
H
A-8107
ERROR
ON
H
A-8108
ERROR
ON
H
A-8100
ERROR
ON H/C
A-8320
-
-
-
-
ON
-
-
-
-
-
-
-
ERROR
ON
C
E-01xx
ERROR
ON
O
A-8800
FORM
-
O
-
(blink)
ERROR
ON
O
A-8900
ERROR
ON
O
A-8A00
ERROR
ON
H
A-8D00
ERROR
ON
H
A-9000
-
-
-
-
-
-
ERROR
ON H/O
A-822x
ERROR
ON H/O
A-832x
ERROR
ON
C
E-1xxx
6
Continued 1Normal Operating Messages.
Description
The stacker (exit hopper) is full of tickets.
Remove the tickets from the stacker (exit hopper).
Boarding print has been started.
Inserted ticket was held or jammed at insterter path.
Remove the (jammed) ticket.
Jam occurred at pre-feed path1 (1
Remove the jammed tickets.
Jam occurred at pre-feed path2 (2
Remove the jammed tickets.
Jam occurred at pre-feed path3 (3
Remove the jammed tickets.
Jam occurred at the path from pre-feed to print unit.
Remove the jammed tickets.
Jam occurred at the path from inserter to escape
Remove the jammed tickets.
Jam occurred at the eject path to the inserter.
Remove the jammed tickets.
Jam occurred at the escape path.
Remove the jammed tickets.
Jam occurred at the printer unit.
Remove the jammed tickets.
Jam occurred at eject path to exit hopper (stacker).
Remove the jammed tickets.
The jammed ticket was not removed yet.
Remove the jammed tickets.
SCN cannot be read (for ticketing).
Check whether the ticket is normal (ATB coupon).
If normal, call maintenance personnel.
Under the off line mode.
Push key "ON/OFF" to turn the mode to ON-LINE.
Waiting for pulling out ticket from front inserter.
Pull out the ticket.
Ticket print out correctly.
On idling (waiting for receiving print data from host)
Data was not received correctly.
Check the host data.
Ribbon has come to end.
Change to new ribbon.
Ribbon has come to near end (less than 150 printing).
Prepare new ribbon.
Ribbon is not installed in thermal transfer print.
Install the ribbon if you use in thermal transfer mode.
Ribbon is installed in direct print mode.
Remove ribbon if you use direct thermal mode.
Ribbon was not wound up.
Try to change the ribbon or re-install it correctly.
Any previous error was not cleared.
Check any JAM and try to open and close the cover (door).
Ticket was inserted in revalidation mode.
On ticketing.
Magnetic Stripe encoding error occurred (after retried 2 times).
Try to clean the magnetic head. (Use the cleaning card.)
SCN cannot be read (for ticketing).
Check whether the ticket is normal (ATB coupon).
If normal, call maintenance personnel.
Data could not be transmitted correctly.
Check the host data.
Operating the Printer
Recovery
slot, Bin1).
st
slot, Bin3).
nd
slot, Bin2).
rd
Advertisement
Table of Contents
