Checking Voicemail - Avaya 3641 User Manual

PTT (Push To Talk
The PTT feature allows Avaya 3645 Wireless IP Telephones to oper-
ate in a group broadcast mode that allows the handsets to behave
like walkie talkies, where a single handset can transmit to multiple
listeners.
* PTT is enabled by the system administrator and set up by the user
in the Config Menu. See the Config Menu options for setting up PTT.
If the system administrator has disabled PTT, the PTT options will
not appear in the Config Menu.
Make a PTT call:
Press and hold the TALK key during
Respond to PTT call:
the 10-second wait period.
Press the END key
End a PTT call:
Receive PTT call
While in a telephone
call:
Select a different
PTT channel:
Answer a telephone Press the START key. PTT transmis-
call during a PTT sions will be pre-empted by the tele-
call:
phone call.
Open the Config Menu > Push-to-
Subscribe to
talk > Subscribed Channels and
additional channels:
then select the channels you want to
add.
Subscribed channels are marked with
an (*).

Checking Voicemail

1. will be displayed when you have a voicemail
2. In the Active in-call Display (Press [Start])
3. Press the Msg softkey to call your voice message
system Ÿ
To call on the default channel, from
standby mode press and hold the
TALK key. Wait for the display to
show Transmitting and then hold
the handset approximately two inch-
es from your mouth and speak.
Press the END key to end the tele-
phone call. Now you can hear the
PTT call.
Press and release the TALK button.
Select a different channel from the
list using or volume up/down
buttons.
w w w . c o n s o l t e c h . c o m
Phone Book/Speed Dial
Searching Phonebook
1. Press the Phbk softkey from Standby Mode
to scroll through names or press keys
2. Use 

corresponding to the first letters of the name
Use
3. to edit the search characters as needed

View Phonebook Entry
1. Select name and press [OK]
2. Entry maybe called, assigned a speed dial or edited
Edit a Phonebook Entry
1. Select name and press [OK]
2. Press Edit softkey to open the Edit Number dis
play to edit existing number. Use Clr and Del and
keypad
3. Press [OK] to display the Edit Name display and
edit name
4. Press [OK] to save changes and exit the editing
screens. Press Back softkey to exit without saving.
Enter a New Phonebook Entry
1. Press the Phbk softkey from Standby Mode
2. Select <new> and press [OK] to open enter
Number display
3. Press [OK] to display the Edit Name display and
edit name
4. Press [OK] to save changes and exit the editing
screens. Press Back softkey to exit without saving.
Assign a speed dial number
1. Press the Spdl softkey from number view in
phonebook
2. When speed dial list opens, navigate to an empty
slot and press [OK]
3. This assigns the phonebook entry to that speed
dial
4. Press [END] to save changes and exit to Standby
Mode