JVC GC-A70 Instructions Manual page 24

Jvc digital camera instructions
Table of Contents

Advertisement

4. [Rec] icon
Appears when recording Video Clip to indicate that recording is in progress.
5. EV Level Indicator
Adjust the EV Level by EV & White Balance setting, and the adjusted value will be displayed.
[-2.0 - +2.0]
It is not displayed at default value [0].
6. White Balance Indicator
Adjust the White Balance by EV & White Balance setting, and the adjusted value will be displayed.
[
]
It is not displayed at default value "AUTO".
7. Battery Indicator
Battery Life > 40%
20% < Battery Life < 40%
10% < Battery Life < 20%
Battery Life < 10%. Status Led flash 5 sec and then power off.
8. Macro Indicator
It is displayed when the Normal
When set to Macro, it is possible to focus the camera on the subject in the proximity of about 45 cm.
Shooting Basics
Procedures:
1. Get the camera ready. (Refer to
2. Toggle on the [MODE] button to select the Video Clip Mode [
3. Adjust the Normal
4. Press the shutter button to start recording.
5. Press the shutter button again to stop recording.
6. To continue shooting, repeat the above steps 4 to 5.
/Macro
switch dial is set to Macro
"Getting
Started")
/Macro
switch dial to either Normal
.
].
or Macro
to suit the distance of the subject.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gc-a70-cGc-a70-eGc-a70-jGc-a70-n

Table of Contents