Haier AC-8888-07 Service Manual page 15

4. Spin Cycle Selection
If you want to extract more water from your clothes during the wash cycle, push
the "Spin" button out. Clothes will be drier when this option is selected. If you
don't want to extract more water from your clothes using the spin cycle, push the
"Spin" button in. If this section is selected, only the excess water in the tub will
drain leaving the clothes wet.
5. Water Temperature
The water temperature is automatically set according to the program you select.
Within the cotton cycle, for 'Pre-wash", cold water is used. : "Normal" utilizes hot,
"Quick" utilizes warm and "Express" uses cold water.
Within the synthetic cycle, "Normal" utilizes warm water while "Quick" utilizes
cold water. In the wool cycle cold water is used.
6. Selecting "Wash Cycle"
Note: Always turn knob clockwise.
7. "Cycle Selector Knob"
Please not that the "Cycle Selector Knob" has different settings to accommodate
your laundering needs.
8. "Cotton Cycle"
Cotton cycle is the most often used cycle. For hot water and heavily soiled
garments, turn "Cycle Selector Knob' clockwise to the 'Normal' position (within
the "Cotton Cycle"). Optimum cleaning results from a combination of time and
temperature. Set on "Normal", the machine is designed to run for approximately
140 minutes.
For most of your tendering and for warm water, turn the "Cycle Selector Knob"
clockwise to the "Quick" position. The normal wash time is approximately 79
minutes.
For extremely soiled garments, some people like to utilize the "Pre-Wash" cycle.
This is accomplished by setting the "Cycle Selector Knob" to "Pre-Wash". The
machine will pre-wash in cold water and then go through the "Normal", 'Quick'
and 'Express' wash cycles.
15