Haier AC-8888-07 Service Manual page 19

D. Unusual noise
Possible causes
I. The packing screws have been disassembled.
2. The washer is placed too near a wall.
3. The washer is loaded over the standard capacity (13.2 lb)
4. There is a foreign object other than fabrics in the washer.
5. The washer is not level standing.
6. Bolts or screws are loose.
7. The belt is loose.
8. Something is wrong with the triangle assembly.
Troubleshooting
1. Disassemble the packing screws.
2. Move the washer away from the wall.
3. Do not load the appliance more than the standard capacity.
4. Remove the foreign object.
5. Adjust the washer until it is leveled.
6. Tighten the bolts and screws.
i. Fastening bolts of vibration damper.
ii. Fastening bolts of balances
iii. Screws of water heating pipe.
7. Increase the tension of belt.
8. Replace the triangle assembly
19