Method Of Maintenance; Troubleshooting - Electrolux VIVA LOGIC Instruction Manual

METHOD OF MAINTENANCE

The following cases are not faults
1.There is water injection in time of washing or rinsing, which is due to that the washer senses the inadequacy of water and
exchanges water level automatically.
2.There is the phenomenon of intermittent spinning in the beginning of spinning, which is performed to achieve better spinning
effects.
3. In the course of spin, the program return to the wash program. Because that is designed to rectify the unbalanced distribution
of load in the spin tub.
4. There is water sound from Spin Tub. This is because there is balancing liquid in Spin Tub Balancer ring. It is for reducing
vibration of spinning.
5. Control panel remains warn after Power is switched OFF. This is due to heat in electrical parts below Control Panel.
Method Of Maintenance
After the whole washing program
The washing machine will give Buzzer sound
after any program operation to remind you of
out the load or going on with other operations.
After finishing washing, please shut off the tap, pull
out the plug in case of water leakage or fire accident.
Cleaning the water inlet
After long time use, the water inlet mesh bag may
be blocked with smudginess, and should be
cleaned according to the following steps:
1. Switch on the power, followed by shutting off the tap .
2. Let the washer works for 5 seconds so that water
flows into the tub through the water inlet hose. then turn
off the power.
3. Unload the water inlet hose and clean the mesh
bag, then restore the water inlet assembly.
Maintenance of shell
Use soft cloth to wipe off the water
and dirt on the surface each time
after use of the washing machine.
Detergent, propellant and other
chemicals are not allowed to use,
for they can cause damage to the
surface.
Cleaning of the lint filter
After using the washing machine for a period, please
clean it according to the following steps:
1. Take out the lint filter.
2. Turn the mesh bag outside and wash it clean in the
water.
3. Restore it and refix it.
TROUBLE SHOOTING
Exceptional
Cause
phenomenon
The power plug is not plugged tight.
The power switch is not switched on.
No indication
Not press "START/PAUSE" button.
in controller
Power cut.
Do not rightly connect the tap with the
The inlet hose
universal connector.
Do not screw tight the nut of the water
leakage
inlet hose.
The drain hose is wrung or jammed.
Does not drain
Dose not inject water Stop water.
Do not open the tap.
Whether the wire netting in the water
inlet was stopped up by the sundries.
Spinning stops and
Cause by that the washing placed
water injecting begins
uneven.
in the course of spin
Does not spin After end to drain, do not close the lid.
Open the lid in course of spinning.
Intermittent spinning In order to attain the better spinning
effect.
Before using the
Remainning water due to testing or
machine water exsits
experiment in the factory.
in the drain hose.
Notices:
The washing machine does not work normally because the voltage is low or too high. Please pull out the plug
and wait till the voltage becomes normal.
If there is still abnormal circumstances after checking the above-mentioned points, please pull out the plug.
Do not repair it by yourself at home, which is very dangerous.
Solution
Re-plug the power plug.
Check the power socket, or change other
Socket.Press "START/PAUSE" button.
Wait for switching on electricity.
Re-install rightly the universal connector.
Screw tight the nut.
The drain hose is made swimmingly, and
solve the problem of jam.
Wait for coming water.
Open the tap.
Clean the netting according to the method
of "Cleaning of the water inlet".
This is automatic rectification for spinning
in the washing program. That the washing
are too much or too little, or that the washing
machine is not placed plane will cause the
unbalance in time of spinning. If there is
still abnormal circumstances after
checking the above mentioned points,
please pull out the power plug and contact
with local service as soon as possible.
Close the upper lid.
Belong to the normal phenomenon
generally.
Belong to the normal phenomenon
generally.