Other Functions; Specifications - Electrolux VIVA LOGIC Instruction Manual

Table of Contents

Advertisement

OTHER FUNCTIONS

Function of fault alarm
Function of fault alarm
Function of fault alarm
Function of fault alarm
Function of fault alarm
Function of fault alarm
Indication of fault
Cause of fault
Entering water less than 16
Alarm for
minutes, reset water level.
water injection
Open the lid after start the
Alarm for
delay time. Open the lid
opening lid
when the washer is spinning.
Be examined imbalance for
Imbalance alarm
the third time.
After draining for 4 minutes,
Drain alarm
does not finished to drain.
Function of automatic power-off
1. Start 10 minutes later to not work, automatically shut off the power.
2. After end to wash and the buzzer sounds 6 times, automatically shut off the power at once.
Function of adjusting for unbalance
1. If the clothes are placed uneven before spinning, easy to result in bigger vibrancy of spinning. The washing
machine has a function of adjusting unbalance. When working, the system of the washing machine always
inspects running state. If finding a phenomenon that the spinning vibrancy is too big, the washing machine
automatically start the adjusting program To adjust the clothes`s state.
2. The washing machine can adjust unbalance twice, if no effect, it will alarm.

SPECIFICATIONS

Item
VIVA LOGIC
Capacity
6.0kg
526 (W) x 536 (D) x 915(H) mm.
Net Dimension
Net Weight
31 kg
53 Ltr.
230V, 50 Hz
360W (Wash)
Alarm of the
Phenomenon
Solution of alarm
of fault
buzzing sound
Open the lid to
The buzzer goes
deal with faults,
on buzzing
E1
then close the lid
sound for 10
seconds. If the
to solve the
alarm does not
alarm.
be solved , every
16 minutes re-
E2
buzzs for 10
seconds.
seconds.
E3
E4
PRECAUTIONS
Safe use of power
Please plug the power cord into the special voltage.
The plug-in and plug-out of the wire should go on
with the plug held with hand.
Don't use hot water
Don't use hot water over 50
to avoid deformation
of the plastics.
Avoid spray of water
Don't let water spray onto the switch or the
panel in case of electric shock and faults.
Keep away from dampness
Don't place the washing machine in extreme
damp surroudings, for dampness may
weaken the insulation of the machine,which may
cause electric shock or faults.
Don't open the lid in time of spinning
If the lid is opened in time of spinning, the washing
machine will arrest at once, which will shorten the
service life. Please avoid opening the lid in the
course of operation as possible
and furthermore, don't
put hands into the tub,
for it is very dangerous
that the clothes wind
the hand despite of low
speed of rotation.
Keep away from smoke and fire
Don't place lighted candles, cigarettes and thermos
nearby to avoid fire accidents or deformation of the
plastics.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents