Dr Pro-Still (Wide Range Mode) - JVC GC X 1 Instructions Manual

DR Pro-Still (Wide Range Mode)

The camera can expand its apparent dynamic range by combining different exposures of an extremely high
contrast subject.
This mode uses the self timer to shoot a still picture. Use a tripod to prevent problems caused by shaky
hands.
1
Turn the Power dial to "M".
•Hold the Lock button down while turning the
Power dial.
2
Select "DR PRO S" with the MODE switch.
•"DR PRO S" appears on the LCD panel.
3
Confirm that the self timer is set to "1 second".
2
3
4
5
NOTES:
4,5
1
Point the lens at the subject and half-press the
Shutter button.
•To display the image on the LCD screen
while shooting, press the DSP button.
Press the Shutter button all the way to take
the picture.
•The shoot standby lamp (green) goes off
when the shooting has finished.
Due to large memory files created when shooting
a picture of uncompressed quality in this mode, it
is recommended to use a Memory card with the
capacity more than 16MB.
It takes a few seconds until the shooting finishes
because this mode uses the exposure twice. Do
not move the object and the camera until the
shooting finishes completely.
47
EN