Inserting The Memory Card - JVC GC X 1 Instructions Manual

Jvc digital still camera user manual
Table of Contents

Advertisement

22
EN

Inserting the Memory Card

Make sure to turn the Power dial to "OFF", when
inserting a Memory card. Memory card is not
loaded in the camera, when purchasing the camera.
1
Open the Memory card cover.
•Slide the knob and then pull the cover.
2
Insert the Memory card.
•Insert the card so that the contact surface is
facing up and the notch on the card is on the
right.
•Do not touch the contact surface on the card.
3
Close the Memory card cover.
•Slide the knob to lock the cover.
NOTES:
There are two types of Memory cards (the 3.3V
type which is indicated by a notch on the right
side, and the 5V type which is indicated by a
notch on the left side). This camera uses only
Memory cards (3.3V) with a notch on the right
side.
The maximum memory card capacity that can be
used with this camera is 64MB.
To avoid damage to the Memory card, do not
drop or strike the Memory card against hard
objects.
To protect the entire content of the Memory card
after shooting, peel and stick a write protect
sticker as shown in the right.
3.3V
Removing the Memory Card
1
Open the Memory card cover.
•Slide the knob and then pull the cover.
2
Remove the Memory card.
•Push on the card to remove it.
5V
GETTING STARTED (cont.)
Contact surface
Where the write protect
sticker is placed

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gc-x1

Table of Contents