Lux Products P711 Installation And Operation Instructions Manual page 23

FOR 7-DAY PROGRAMMING OPTION: You will be setting each day individually, one
at a time. After any particular day's program has been set, you will have the
ability to copy these values either to just the next day or to the remaining days
left in the week (described further below).
If the backlight is not already illuminated, press the SET button one time to light
the display. With the screen illuminated, press the SET button one time, and you
should now see the words "SET" and "PROGRAM" shown at the top of the display,
and "Morn" and "Mo" at the bottom of the display. Use the UP/DOWN buttons to
adjust the start time for the MORN period, then press the NEXT button to
advance. Use the UP/DOWN buttons to adjust the set temperature for the MORN
period, then press the NEXT button to advance. Now adjust the start time and
set temperature for the DAY period, pressing the NEXT button after each to
advance. Continue with these same steps to adjust the start times and set
temperatures for the EVE and NITE program periods.
After the NITE period is finished for the weekdays, press NEXT and the
thermostat will advance forward to the Tuesday MORN period. Just like the
previous day, use the UP/DOWN buttons to adjust the start time then press the
NEXT button to advance. Continue with these same steps to adjust the start
times and set temperatures for the remaining periods of the remaining days as
desired.
COPY FEATURE: The copy action takes the time and temperature values from the
previous day, and uses them for the current day. To perform a copy, press and
release the HOLD button one time per copy. You should see the word "COPY"
show up in the display screen for approximately one second, and the day of the
week will have advanced forward to the next day. To keep copying to the next
upcoming days, press and release the HOLD button for each day that you want to
copy the previous day's values into.
23