Pro-Line Boats Pro-mt Assembling Instructions page 7

HARDWARE USED
(ACTUAL SIZE) 13
× 2
Front Outer Hinge Pin
× 2
M2.5 Locknut
× 2
M3 × 18 BHCS
× 2
M3 Locknut
HARDWARE USED
(ACTUAL SIZE)
14
× 4
Short Rod Ends
× 4
Large Pivot Balls
HARDWARE USED
(ACTUAL SIZE) 15
× 2
M3 × 18 BHCS
× 2
M3 Locknut
Front Hub Assembly to Camber Link & Arm
M3 LOCKNUT
OUTSIDE HOLE
M2.5 LOCKNUT
Steering Links to Rod Ends & Pivot Balls
USE INCLUDED TURNBUCKLE WRENCH, REPEAT THIS STEP fOR OPPOSITE SIDE
Steering Link to Steering Knuckle
REPEAT THIS STEP fOR OPPOSITE SIDE
70mm (ACTUAL SIZE)
53.5mm (ACTUAL SIZE)
KEEP THESE MARKS ON DRIVER'S SIDE
REPEAT THIS STEP fOR OPPOSITE SIDE
× 2