Pro-Line Boats Pro-mt Assembling Instructions page 13

HARDWARE USED
31
(ACTUAL SIZE)
Shock Setup (Fluids Bag)
1. Remove Springs
2. fill with oil
3. Bleed
4. Tighten
5. Replace Springs
HARDWARE USED
(ACTUAL SIZE)
32
× 2
M3 × 16 BHCS
Use M3 Locknuts
installed on Step 4
HARDWARE USED
(ACTUAL SIZE) 33
× 2
M3 × 16 BHCS
Use M3 Locknuts
installed on Step 19
Install Front Shocks
OUTSIDE HOLE
Install Rear Shocks
PRO TIP
Move bottom shock mounting
position inward for more
suspension travel.
× 4
Visit
prolineracing.com/pro-mt/build
for shock assembly videos
and spring rate charts.
HOLE 2
fROM INSIDE