Tone Settings (Rings & Tones); Message Tone - Doro PhoneEasy 410s gsm User Manual

Tone settings (rings & tones)
Tone setup
1 . Press
Menu
2 . Select
Tone settings
3 . Select
Tone setup
4 . Select
Ring Tone
5 . Select one of the available tones, the tone will be played.
Press
OK
6 . Set up the

Message tone

Ringtone Volume
1 . Press
Menu
2 . Select
Tone settings
3 . Select
Volume
4 . Scroll
Alert type (ring/vibrate)
Incoming calls can be signalled by a ring tone and/or vibration.
1 . Press
Menu
2 . Select
Tone settings
3 . Select
Alert type
4 . Select the desired signalling mode and press
Ring only
Vib . only
Vib & ring
Vib -> ring
, scroll to
and press
and press
to confirm, or press
Alarm , Opening tone
and
Keypad tone
, scroll to
and press
/
to change the ring volume, then press
, scroll to
and press
Ring tone only
Vibration only
Vibration and ring tone
Starts with vibration and adds ring tone after a short while
English
and press
and press OK
OK .
.
OK
Back
, Closing tone
in the same way.
and press
and press OK
.
OK
and press
and press
OK
OK .
25
.
OK
.
to discard changes.
.
OK
.
OK .
.
.
OK
,
OK .