Tone Settings (Rings & Tones) - Doro PhoneEasy 410gsm Manual

Display information
In standby mode the display can present date, time, and the
connected network, or just the time.
1 . Press
Menu
2 . Select User setup
3 . Select
Idle display
4 . Select
Clock only
Display backlight
Sets the delay time before the display backlight is turned off.
1 . Press
Menu
2 . Select
User setup
3 . Select
LCD backlight
4 . Select
15 sec.
Tone settings (rings & tones)
Tone setup
1 . Press
Menu
2 . Select
Tone settings
3 . Select
Tone setup
4 . Select
Ring Tone
5 . Select one of the available tones, the tone will be played.
Press OK
6 . Set up the
Message tone
Ringtone Volume
1 . Press
Menu
2 . Select
Tone settings
3 . Select
Ringtone Volume
4 . Scroll
, scroll to
and press
and press
or All info
, scroll to
and press
,
30 sec.
, scroll to
and press
and press
and press
to confirm, or press
Alarm , Opening tone
and Keypad tone
, scroll to
and press
/
to change the ring volume, then press
English
and press
OK .
.
OK
and press
and press
.
OK
and press OK
or and press
1 min.
and press
OK
.
OK
OK .
Back to discard changes.
, Closing tone
in the same way.
and press
OK
and press
30
OK .
OK .
OK .
.
.
OK
.
OK
.
OK .
.
.
OK
,
OK .