Accepting A Call For Another Member Of Your Team; Ringing Group - Siemens HiPath 500 Operating Instructions Manual

Step by Step
Pickup - group?
*81=Ringing group on?
Ringing group off?
Accepting a call for another member of
your team
You can use your own telephone to accept calls for
other telephones in your team, even while engaged in
an ongoing call. To do this, contact your service person-
nel to find out if a pickup group has been configured.
Prerequisite: Your telephone rings briefly. "Call for:" ap-
pears on the upper display line with the station number
or name of the originator; the station number or name
of the caller appears on the lower line.
Confirm.

Ringing group

You can have calls for your telephone signaled audibly at
up to five other internal phones. The phone that ans-
wers the call first receives the call.
Special features must be taken into considerati-
on if your telephone operates with HiPath 5000
(system networking via PC network)
Saving, displaying, and deleting telephones for the
ringing group
N
Press the key shown.
Select and confirm the option shown.
Follow the display prompts (enter the internal station
number).
If your phone belongs to a ringing group, your
display will show the station number or the name
of the originator on the upper line and that of the
caller on the lower line.
Removing all telephones in a call ringing group
Select and confirm the option shown.
Using team functions
page 85!
79