Advanced Operation - Eneo GLS-2301H Installation And Operating Manual

7. Advanced Operation

Question 1:
How to set up the motion detection area and its sensitivity? How to record into the SD card for 30 seconds
when the motion has been activated and use the Microsoft Internet Explorer to view the recorded files ?
• Set up the motion detection
. Click the Application button in the home page.
. Click the Motion detection button on the left side of the page to enter the „MOTION DETECTION" page.
3. Click and drag the mouse left button across a targeted zone to draw a red rectangle on the image.
You can also draw the other targeted zones as you wish.
4. Please Enable the motion detection function.
5. Set up the sensitivity level from: Lowest, Low, Medium and High to Highest.
6. Click the Submit button to submit the setting.
• Recording the images into an SD card while the motion detection function is working
. Click the Application button in the home page.
. Click the Enable button below the ALARM item on the left side of the page to enter the „ALARM APPLICATION
ENABLE SETTING" page.
3. Tick on „Enable ALARM-SAVE into SD Card" to activate it.
4. Click the Submit button to submit the setting.
NOTE: Please remember to insert the SD card into the built-in SD slot of the unit first.
• Set the recording time (the AVI duration) of the SD card
. Click the Application button in the home page into the „SD-Card APPLICATION SETTING" page.
. Choose the AVI Duration from the drop-down list.
If you want to record the file into the SD card for 30 seconds, please choose „30 seconds".
3. Click the Submit button to submit the setting.
• Use IE to view the recorded files
. Click the SD Card button in the home page to enter the page containing the „FILELIST of MEMORY CARD".
. Click the filename which you want to view.
3. It will ask you to enter the username and password.
4. If you didn't set the other player before, the AVI file will be played by the Windows Media Player.
5