Advanced Operation - Eneo GLS-2302H Operating Manual

7. Advanced Operation

Question 1:
How to view the live images of the Video Server via the Microsoft Internet Explorer on the Desktop PCs or
the laptop computers in a situation where there are no monitors or television ?
• To get the IP address of the Video Server without a monitor, use one of the following two methods to get
the IP address: UPnP and USB function.
Upnp: Please refer to APPENDIX 1.
IP function: Please refer to 3.4 The USB function.
Question 2:
How to activate UPnP ?
. Follow the default settings to set up the related settings, and connect the hardware.
. Activate the Web browser and key in the Video Server URL.
. SETUP –> Network button.
4. Select „Enable UPnP presentation".
5. Select „Enable UPnP port forwarding"; make the „Forwarding Port" setting.
NOTE:
1. Perform the step 4 above; turn on the PC's „My Web Neighbors" and confirm if the Video Server can be
found, and click to go online to the Video Server's first page.
2. Perform the step 5 above; make the Route UPnP port forwarding setting.
3. Your PC can connect to the Video Server webpage via the router.
By working with the router, the Video Server can operate the port mapping (the port forwarding)
function. For example, if the router configures a particular port, say port „8080", to your Video Server,
you can input the IP address as http://xxx.xxx.xxx.xxx:8080 on the URL entry box of the web browser
to access the device's web setting page.
Question 3:
How to change the Video Profiles 1, 2, 3 ?
. Plug the power cable into the Video Server power connector.
. Plug the network cable into the Video Server Ethernet terminal.
. Confirm the web-connection status; the connection between the PC & HUB and between the Video Server &
HUB is now activated.
4. Confirm that the IP addresses of the PC and the Video Server are in the same sub-net.
5. Activate the Web browser and key in the Video Server's URL.
6. Switch to the front-page of Live; click Profiles ,  & .
6