Rear Panel - Eneo GLS-2301H Installation And Operating Manual

3.2 Rear Panel

1. DC jack
The inlet connects to an external power supply. Connect with the  VDC/4VAC TUV-approved Power Supply;
or connect with the UL Listed Class  Power Supply or ITE power supply marked 'LPS' or its equivalent.
2. Video in connector
The BNC connector is used to connect to the video output from the camera.  camera can be connected to the
connector.
Video out connector
This BNC connector provides a video signal to the main monitor.
3. ETHERNET (PoE) Connector
This is a standard RJ-45 connector for 0/00 Mbps Ethernet networks. PoE (Power over Ethernet) function:
Provides power to the device via the same cable as used for the network connection.
NOTE: Please refer to the APPENDIX – PoE Installation Method for more details.
4. ALARM I/O
This is an 4-PIN connector including the alarm input x 6, alarm-out x6, GND x 6, RS-485+-( pins), audio input
and audio output items for connecting with external devices.
6