Pppoe & Ddns - Eneo GLS-2301H Installation And Operating Manual

6.1.8 PPPoE & DDNS
Using the PPPoE
. Install the XDSL software (obtained from your ISP dealer) in your PC.
. Search your Video Server's IP address: you can use your Network Viewer's Scan IP program, or just connect the
Video Server and the Video monitor. The monitor screen will show the IP address on its right side.
3. Installing an IP address in your PC or notebook.
Desktop –> Move the mouse focus to the Network neighborhood and click the right key of the mouse –>
Choose the properties –> Choose your local connection –> Choose the properties and select the configuration
–> Select the TCP / IP –> Choose the properties –> Type in the IP address in a four-part formula, for example
„9. 68. .0" (the first three parts must be identical to the above numbers, only the last part can be changed
to your own number, which must never exceed 55) –> Click the mask and the mask input, namely
„55. 55. 55. 0" (a fixed formula) –> Click „OK" –> Click „OK".
4. Desktop –> Choose IE browser –> Type in the Video Server IP address in the URL (check step  above) –>
Enter –> Video Server images will appear.
PPPoE Settings
. Enter the Video Server home page –> Choose the network –> Type in „User Name: admin" and „Password:
9999" –> Click „OK'.
. Choose PPPoE –> PPPoE mode: Select „ON" –> Type in „Account" –> Type in „Password" –> Submit –>
Unplug the power connection.
3. Plug in the Video Server and it will receive an IP address from the ISP dealer (this IP address is dynamic - every
time you unplug and plug in again you'll get a new IP address).
Test: Go to the Internet.
. Set your PC to enter the Internet.
. Desktop –> IE browser –> Type in the Video Server IP address (the same address as in the PPPoE settings
and step 3 above) –> You can see the Video Server images.
DDNS settings
. Check your Video Server's IP address (Scan IP software or monitor) –> open your IE browser –> Use the address
to connect to the Video Server or view the images –> Choose the network –> Type in „User name : admin" and
„Password : 9999" –> Click „OK" .
. Choose the „DDNS" –> Click „Enable DDNS" –> Enter the „DDNS host name", for example „abc3. homeip.net"
–> Type in „DDNS Account", for example „abc3" –> Enter the „DNS Password", for example „7777" –>
Submit –> The settings are now complete –> Close the IE browser.
3. Open the IE browser again –> Type in the Website address you just applied for, such as „abc3.homeip.net" –>
You can look at your Video Server images right away. The procedure is complete.
NOTE: These settings are only for your ADSL Dynamic IP configuration. If your configuration is fixed (true IP),
you don't need to proceed with the PPPoE and DDNS settings. The DDNS is just for your convenience.
5