Table of Contents
Advertisement
Setting your logo
The logo can be your company, division or
personal name.
{HANDSET MUTE}
{MENU}
{<} {>} {+} {-}
1
Press {MENU}.
2
Press {<} or {>} until the following is
displayed.
3
Press {SET}.
4
Enter your logo, up to 30 characters, using
the dial keypad. See page 28 for details.
Example: "BILL"
1. Press {2} 2 times.
L Cursor (|) will appear on the display.
2. Press {4} 3 times.
3. Press {5} 3 times.
4. Press {>} to move the cursor to the
next space and press {5} 3 times.
5
Press {SET}.
L The next feature will be displayed.
(Insert)
{SET}
{FLASH}
(Hyphen)
{STOP}
(Delete)
SYSTEM SET UP
PRESS NAVI.[( )]
YOUR LOGO
PRESS SET
LOGO=
LOGO=|
B
LOGO=B|
I
LOGO=BI|
L
LOGO=BIL|
L
Initial Programming
6
Press {MENU}.
Note:
L You can enter your logo by pressing {+} or
{-} in step 4. In this case, press {>} to
move the cursor (see page 28 for details).
To change capital or lower-case letters
Pressing the {#} key will change to capital or
lower-case alternately.
1. Press {2} 2 times.
2. Press {4} 3 times.
3. Press {#}.
4. Press {5} 3 times.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect character, and make the correction.
To delete a character
Press {<} or {>} to move the cursor to the
character you want to delete and press {STOP}.
To insert a character
1. Press {<} or {>} to move the cursor to the
position to the right of where you want to
insert the character.
2. Press {HANDSET MUTE} to insert a space
and enter the character.
LOGO=|
B
LOGO=B|
I
LOGO=B|
i
LOGO=Bi|
l
27
Advertisement
Table of Contents
