Table of Contents
Advertisement
How to set up
{+} {-}
{RECEIVE MODE}
1
Set the fax machine to FAX ONLY mode by
pressing {RECEIVE MODE} until the
following is displayed.
FAX ONLY MODE
2
Change the ring setting in FAX ONLY mode
to 5 EXT.TAM (feature #06 on page 55).
3
Turn on your answering machine.
4
Adjust the ring setting of the answering
machine to less than 4.
L This will allow the answering machine to
answer the call first.
Note:
L If you wish to answer calls manually, set the
fax machine to TEL mode by pressing
{RECEIVE MODE}.
TEL MODE
Connections and Setup
How to receive calls
At first your answering machine will pick up the
call.
Helpful hint:
{SET}
{FAX/START}
If the answering machine is turned off
You can receive a fax with the fax machine and
an extension telephone, if connected.
FAX
With the fax machine
1. When the fax machine rings, lift the handset
TEL
2. When document reception is required, a fax
With an extension telephone
1. When the extension telephone rings, lift the
2. When document reception is required, a fax
3. Replace the handset.
Note:
FAX
TEL
L If the call is a phone call, the answering
machine will record voice message
automatically.
L If a fax calling tone is detected, the answering
machine will be disconnected and the call will
be switched to the fax machine. The fax
machine will receive a fax automatically.
of the fax machine.
calling tone (slow beep) is heard, or no sound
is heard, press {FAX/START}.
L The fax machine will start reception.
handset of the extension telephone.
calling tone (slow beep) is heard, or no sound
is heard, press {*}{9} (pre-selected fax
activation code) firmly.
L The fax machine will start reception.
L You can change the fax activation code in
feature #41 (page 57).
17
Advertisement
Table of Contents
