AB IPBox 9000HD User Manual page 34

12. Select your TV system (1080i, 720p, PAL)
Caution: When the TV SYSTEM (your TV type) does not match to the STB setting, TV screen and/or audio
may not show properly.
In that case, you need to switch off the STB, and press Power button -> then press and hold Menu button
-> use Up/Down direction button to select your TV system -> press OK on the front panel.
If you can open and see the Main menu, you can adjust on the AV Settings menu.
13. IP setup
13.1. Manual setting
Use the Navigation Buttons and directly enter numeric values of corresponding parameter (IP Address,
Subnet Mask, Gateway) and then press SUBMIT.
You must also manually set parameters when connecting your receiver with another STB or PC without using
a switch or a router. Use crossed Ethernet cable.
34