AB IPBox 9000HD User Manual page 17

10.4. DVB-S/S2 Satellite Configuration
The Satellite Configuration menu will appear automatically right after adjusting the Local Time. Press OK
button. Empty list of satellites appears. Press Yellow function button (Add satellite) to enter Satellite
Configuration menu.
10.4.1 Setting of LNB parameters
Set each LNB parameter: SAT Name, Tuner ID, LNB Type, Local Freq, TP Freq, LNB Power, 22 KHz,
Toneburst, DiSEqC Parameter, Uncomitted, DiSEqC Repeats, Swap Commands and Sequence Repeat by
pressing LEFT/ RIGHT button or OK button as your LNB and dish aimed. You can see whole selectable
values of each item by pressing OK button. You will see the Signal indicator as yellow and green if all
values are set correctly.
10.4.2 Automatic Scanning the satellites
This is to scan all the channels of the satellites you setup in Satellite Configuration menu. Select Tuner ID
and Satellite Name, Network Search option and Search Method option by pressing LEFT/RIGHT button and
press OK on SEARCH to start scanning. To cancel scanning during the progress press CANCEL button.
Meantime searched channels will be stored into memory.
17