Override Function; Using The Remote Control - Rinnai Avenger 25 Plus Operation Manual

Return to Set Timer Programs.

USING THE REMOTE CONTROL

STANDBY Button
Heater in Stand by.
Rinnai

OVERRIDE FUNCTION

S TA NDBY/O N
S TA NDBY/O N
S TA NDBY/O N
STA NDBY/ON
STA NDBY/ON
STA NDBY/ON
19
This function is used to manually override the
current operation of the heater. For example: if the
heater is between the finnishing and starting times
of a timer program and the Override button is
selected, then the heater will begin to operate and
heat the room.
The heater must be between the finnishing and
starting times of a timer program for the Override
to function to work, ''TIMER ON'' is shown in the
control display and the On/Combustion indicator is
illuminated Green (steady) when this is the case.
Press the ''OVERRIDE'' button once to turn heater
on, the heater Mode and Temperature controls are
now available.
''STANDBY/ON''
The remote control can only be used when the
heater is in STANDBY, ON or in OVERRIDE
modes. If the heater is between the finnishing and
starting times of a timer program the remote
control will have no effect.
The remote control is able switch the heater
between STANDBY or ON and adjust the heater
temperature UP or DOWN.
STANDBY
button once will return the heater to STANDBY.
return the heater to STANDBY, then the
the ''STANDBY''
Operation Manual