Before Requesting Service - Black & Decker MY30PGCS Instructions Manual

Table of Contents

Advertisement

20. It's hazardous for anyone other than a competent person to carry out any service or
repair operation that involves the removal of a cover that gives protection against
exposure to microwave energy.
21. Do not allow children to use the oven without supervision. They should operate only
when adequate instructions have been given so that the child is able to use that oven in
a safe way and understands the hazards of improper use.
22. Failure to maintain the oven in a clean condition could lead to deterioration of the
surface that could adversely affect the life of the appliance and possible result in a
hazardous situation. Regular cleaning is advised.
23. It is not recommended that this product is used by children
24. Never leave metal utensils in microwave.

BEFORE REQUESTING SERVICE:-

Things which may happen and are normal
1. You may experience some radio interference to your radio, TV or similar equipment.
When there is interference, if may be reduced or eliminated by taking the following
measures:
a) Clean the door and sealing surfaces of the oven.
b) Reorient the receiving antenna of radio or television.
c) Relocate the microwave oven with respect to the receiver.
d) Move the microwave oven away from the receiver
e) Plug the microwave oven into a different outlet so that microwave oven and receiver
are on different branch circuits.
2. During cooking, when food heats up, the warm air generated circulates inside the oven
cavity which may escape through the vents. Some of it may condense into steam and
accumulate on the oven door.
3. There may be humming and clicking sound when cooking by Combination as the oven
automatically switches from microwave power to Grill to create a combination setting
making the sound.
PROBLEM
Oven will not
turn on
Oven will not
start cooking
When the oven is on, noise
is emitted from the glass tray
POSSIBLE CAUSE
The oven is not properly connected
Circuit breaker or fuse is tripped
The socket may not be working
The door is not properly closed
START button was not pressed
Another program has already been
entered in the oven.
The program has not been properly entered
CANCEL button was pressed accidently
The roller ring and the oven
button are dirty
REMEDY
Remove the plug from the socket. Wait for
10 seconds and then reinsert.
Reset the circuit breaker or replace the fuse.
Test the socket with another appliance.
Close the door properly.
Press the START button.
Press cancel button to cancel the program and
then program again.
Program properly according to Operating Instructions
Program the oven over again
Clean the parts according to 'How to care for your
Microwave Oven'.

Advertisement

Table of Contents
loading

Table of Contents