Specifying Micro Digital Image Shift; Adjusting Image Registration - Canon WUX450 User Manual

Specifying Micro
Digital Image Shift
> [Install settings] > [Professional
settings] > [Micro-digital image
shift]
HDMI Component
Digital PC Analog PC
Use this setting to fine-tune digital
image shift.
Off Does not perform micro digital image
shift.
Adjust Performs micro digital image shift.
Use the [ ] / [ ] buttons for vertical
shift.
Use the [ ] / [ ] buttons for horizontal
shift. When you have finished
correcting, press the OK button.
When you have completed the
adjustment, press the OK button to
accept your setting and then press the
MENU button or EXIT button.
• [Off] is the factory default.
• Select [Adjust] to fine-tune the image
position.
Installation-Related Menu Settings
Adjusting Image
Registration
> [Install settings] > [Professional
settings] >
HDMI
LAN
Digital PC
USB
Adjusts colors that are out of
alignment. You can adjust red and
blue registration independently,
relative to green.
Off Does not perform image registration.
Adjust Performs image registration.
When the setting is completed, press
the OK button.
When the setting is completed, press
the OK button to accept your setting
and then press the MENU button or
EXIT button.
• [Off] is the factory default.
• You can adjust image registration by
selecting [Red] or [Blue].
147
[Registration]
Component LAN
Analog PC USB