Setting Errors - Canon WUX450 User Manual

Completing Computer Settings
Item
IP ID
IP address
Port number

Setting Errors

When a setting-related error occurs, the error name is displayed on the screen, and
a "!" mark is displayed next to the input field which caused the error.
The error meanings are as shown below.
Error
Input error
Password setting error
Invalid SMTP
System failed to connect SMTP server.
System failed to connect POP3 server.
System doesn't support this auth type.
System failed to authenticate.
The system failed to send the test mail.
Unknown error
Explanation
Specify the controller's IP ID.
Specify the controller's IP address.
Specify the controller's port number.
A setting outside the valid range was set on the
settings screen.
The set password and confirmation password did
not match.
The SMTP server IP address has not been set.
Failed to connect to the SMTP server when
sending a test mail.
Failed to connect to the POP3 server attempting
to send a test mail.
An authentication type was set which is not
supported by the server.
Authentication failed attempting to send a test
mail.
Sending of test mail failed due to a connection
failure with the SMTP server or an error which
does not ordinarily occur.
Unknown error
188
Factory default
setting
3
127.0.0.1
41794
Meaning