Troubleshooting - Range Master ER-8102P-3 User Manual

6. Clean inlet (venturi) of burner with small bottle brush or compressed air.
7. Remove all food residue and dirt on burner surface.
8. Clean any clogged ports with a stiff wire (such as an opened paper clip)
9. Inspect burner for any damage (cracks or holes). If damage is found ,replace with new burner.
Reinstall burner, check to insure that gas valve orifices are correctly positioned inside burner inlet (venturi). Also
check position of spark electrode.

TROUBLESHOOTING

Problem
Burner will not light with match
Irregular flame pattern, flame does
not run the full length of burner
Flame is yellow or orange
Flame blow out
Flare-up
Persistent grease fire
Flashback(fire in burner tube(s))
Inside of lid is peeling-like paint
peeling
IF YOU NEED HELP OR HAVE A WARRANTY OR CUSTOMER SERVICE QUERY,
AFTER SALES SUPPORT
Possible Cause
No gas flow
Obstruction of gas flow
Spiderwebs or insect nest in venturi Clean venturi
Burner ports dogged or blocked
Burner ports dogged or blocked
New burner may have residual
manufacturing oils.
Spiderwebs or insect nest in venturi Clean venturi
Food residue , grease of seasoning
salt on burner
High or gusting winds
Low on LP Gas
Grease buildup
Excess fat in meat
Excessive cooking temperature
Grease trapped by food buildup
around burner system
Burner and/or burner tube is
blocked
The lid porcelain coated, not paint.
PLEASE CALL 888-892-2075.
DO NOT RETURN TO PLACE OF PURCHASE.
16
888-892-2075 email: rangemaster@1800acs.com
Prevention/Cure
Check if LP cylinder is empty
Clear burner tubes
Clean burner port
Clean burner port
Burn grill for 15 minutes with the lid closed
Clean burner
Turn front of grill to face wind or increase
flame height
Replace LP cylinder
Clean grill
Trim fat from meat before grilling
Adjust (lower) temperature accordingly
Turn knobs to "LOCK OFF POSITION". Let fire
burn out. Leave lid position in closed and let
fire burn out. After grill cools, remove and
clean all parts.
Clean burner and/or burner tube.
Baked on grease buildup has turned to car-
bon and is flaking off. Clean thoroughly.
45090-14
ITEM #