Lighting Instructions - Range Master ER-8102P-3 User Manual

LIGHTING INSTRUCTIONS
WARNING: KEEP OUTDOOR GAS COOKING APPLIANCE AREA CLEAR AND FREE FROM
COMBUSTIBLE MATERIALS, GASOLINE AND OTHER FLAMMABLE VAPORS AND LIQUIDS.
WARNING: ATTEMPTING TO LIGHT THE BURNER WITH THE LID CLOSED MAY CAUSE AN
EXPLOSION.
WARNING: MAKE SURE THERE ARE NO OBSTRUCTIONS OF AIRFLOW TO THE GAS UNIT.
SPIDERS, INSECTS CAN NEST WITHIN AND CLOG THE BURNER/ VENTURI TUBE AT THE
ORIFICE. A CLOGGED BURNER TUBE CAN LEAD TO A FIRE BENEATH THE APPLIANCE.
LIGHTING
1. Open lid.
2. Push and turn the control knob to HIGH.
3. Press the igniter button repeatly to light burner.
4. If ignition does not occur in 5 seconds, turn Burner control knob OFF position, wait 5 minutes and repeat lighting
procedure.
5. If igniter does not light burner, use a match to light burner manually. Access the burner through the hole in
bottom bowl.
6. After lighting, observe the burner flame. Make sure all burner ports are lit and flame height matches illustration.
AFTER SALES SUPPORT
WARNING:IF BURNER FLAME GOES OUT DURING OPERATION, IMMEDIATELY TURN
THE GAS " OFF " AND OPEN LID TO LET THE GAS CLEAR FOR ABOUT 5 MINUTES
BEFORE RELIGHTING.
888-892-2075
14
email: rangemaster@1800acs.com
45090-14
ITEM #