Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Digitus 3-port usb - PS/2 KVM Switches with DVI and audio
Summary of Contents for Digitus 3-port usb - PS/2 KVM Switches with DVI and audio
- Page 1 User’ s Manual...
- Page 2 1. Introduction Thank you for purchasing our Combo DVI KVM Switch! You now have a high quality, durable system that will enable you to control 3 Host computers and/or servers by using PS/2 and/or USB Connectors from one console (PS/2 or USB Mouse, PS/2 or USB Keyboard, and Monitor).
-
Page 3: Specifications
2. Specifications 2.1 General Specification Number Of Computers Controlled Selection Method Push Button and Hot-Key (PS/2 and/or USB Keyboard) LEDs Red for PC Selection Green for PC On-Line ready Video 3 x DVI UXGA female 3 x USB - B type female PC Connectors Speaker 3 x audio female jacket... -
Page 4: System Requirements
3. System Requirements Console DVI monitor capable of the highest resolution. PS/2 and/or USB Keyboard/Mouse Computer or Server The following equipment must be equipped with each computer or server. - Type A USB port. - DVI connector. Cables The Combo DVI KVM Switch is using separate (DVI + USB/Audio) cables. To purchase the specific cable sets, please contact your dealer. - Page 5 5. Operations The 3-Port Combo Free DVI KVM Switch has the ability to switch the keyboard, video, mouse simultaneously Note: When using the two-step Hot Key sequences, the keys must be pressed within 5 seconds; otherwise the Hot Key action will be terminated. 5.1 Push Button on front panel 5.2 Hotkey Selection ( USB and/or PS/2 keyboard ) Note:...
- Page 6 You can synchronize the PC selection, by using the following two-step Hot Key sequence. To send commands to the Combo Free DVI KVM Switch, press the [Scroll] key twice (Step 1), then press key [1] or [2] or [3] and [Enter] (step 2) to assign the PC to a particular PC.
- Page 7 5.2.3 Beeper Enable Hot Key: [Scroll] → [Scroll] → [B] → [Enter] to Disable [Scroll] → [Scroll] → [B] → [Enter] to Enable The Speaker/Beeper’ s default setting is “ Enable” . While the switching connections are activated and Speaker/Beeper is in “ Enable” status, the beeper has a short beeping sound.
- Page 8 5.3.2 Single Audio ( Speaker + Microphone ) Selection Hot Key: [Scroll] → [Scroll] → [A] →[Enter] to enable or disable the audio auto switch mode [Scroll] → [Scroll] → [A] → [1]→ [Enter] to select PC1 Speaker and Microphone [Scroll] →...
- Page 9 Hot Key definition table Step 1 Step 2 Action [Scroll] + [Scroll] [1] + [ Enter ] Switch the active connection to PC 1 [Scroll] + [Scroll] [2] + [ Enter ] Switch the active connection to PC 2 [Scroll] + [Scroll] [3] + [ Enter ] Switch the active connection to PC 3 [Scroll] + [Scroll]...
-
Page 10: Sun Microsystems Function Key Emulation
Sun Microsystems Function Key Emulation: There are 16 special functions on the Sun Microsystems keyboard, the Combo Free DVI KVM Switch can emulate these function keys via the PS/2 and/or USB keyboard. Here is the mapping table for these functions operation. To active these emulation on the PS/2 and/or USB keyboard, you have to press the LEFT Window KEY first (this key usually is located between the left [Ctrl] and left [Alt]), then choice the second relative key. -
Page 11: Fcc Statement
FCC Statement This device generates and uses radio frequency and may cause interference to radio and television reception if not installed and used properly. This has been tested and found to comply with the limits of a Class B computing device in accordance with the specifications in Part 15 of the FCC Rules.
Need help?
Do you have a question about the 3-port usb - PS/2 KVM Switches with DVI and audio and is the answer not in the manual?
Questions and answers