Connecting Mobile Phone With Hands-Free System - Skoda Infotainment Navigation Columbus Owner's Manual

Connecting mobile phone with hands-free system

Introductory information
The hands-free system is indicated as SKODA_BT_wxyz in the Bluetooth
to be paired. wxyz is replaced with the last four symbols of the VIN code of your
vehicle. You can change the name of the hands-free system
Prerequisites for successful pairing
›
Ignition is switched on.
›
®
Both the Bluetooth function and the visibility of the hands-free sys-
tem » page 13 and mobile phone must be switched on
ual of the mobile phone.
Automatic connection
After switching on the unit, the system attempts to connect
ted mobile phone . If the connection cannot be established, the system will at-
2)
tempt to connect to other previously connected phones, one by one.
During the automatic connection process, the system displays a list of function
keys:
■ - Display a list containing mobile phones which the system automatically at-

tempts to connect to; here, it is possible to specify that the system should con-
nect to one of the listed phones
- Search for a mobile phone
■ Find telephone
Disconnect the connection
›
By removing the ignition key (or turning off the ignition and opening the driver's
door in the case of vehicles with the KESSY system).
›
By disconnecting the hands-free system or switching off the Bluetooth
tion in the mobile phone.
›
®
By switching off the Bluetooth
›
By disconnecting or deleting the paired device from the list of paired devi-
ces » page 13.
1)
Provided that the ignition and the Bluetooth
2)
With some phones, it is necessary to set the connection to the device as "authorised" in order for the
automatic connection to be successful. If this is not set, the system will prompt you for a confirma-
tion each time you attempt a connection with the phone.
34
Phone
» page 13.
» See the owner's man-
to the last connec-
1)
» page 34
function in the unit » page 13.
®
function are switched on.
Possible symbols in the list of found or paired devices
Symbol

®
device



®
a)
HFP is a Bluetooth profile that supports the functionality of the hands-free system.
b)
A2DP and AVRCP are Bluetooth
Note
You can pair a maximum of 20 devices. If this maximum number is reached, pair-
ing a new device will cause the device not used for the longest time to be deleted
automatically.
Pairing from the hands-free system
›
Press the button
Where the mobile phone has been paired but the automatic connection is unsuc-
cessful, check that the mobile phone's Bluetooth
that the device is visible.
Press the function key
device is included in the list of paired devices.
®
func-
If no mobile phone is connected to the hands-free system, the message Please
find and connect a mobile telephone is displayed.
If a mobile phone is connected to the hands-free system, press the button
» Fig. 21 on page 33.
B
›
Press
Find telephone
At the end of the search, the display shows the message Device search finished.
Description
Devices that support the functionality of the hands-free sys-
®
tem (Bluetooth profile HFP)
a)
Devices that are connected to the hands-free system via
®
Bluetooth profile HFP
a)
® ®
Bluetooth players (Bluetooth profiles A2DP and AVRCP)
®
Bluetooth player connected to the unit via Bluetooth
files A2DP and AVRCP
b)
®
profiles that support multimedia functions.
.
PHONE
®
function is switched on and
» Fig. 21 on page 33 to check whether the Bluetooth
B
.
b)
®
pro-

®
