Problem Solving Guide / After Sales Service - Miele S 758 Operating Instructions Manual

The vacuum cleaner has switched
itself off automatically.
A temperature limiter switches the
vacuum cleaner off automatically if it
gets too hot. The warning light , will
then come on to indicate that it has
overheated.
Overheating can occur if, for instance,
large articles block the suction tube or
the dustbag is full or contains particles
of fine dust. A heavily soiled exhaust or
dust compartment filter can also be the
cause of overheating. Switch off the
vacuum cleaner using the On-Off
switch.
After removing the cause, wait for a
period of approx. 20 - 30 minutes, to
allow the vacuum cleaner to cool down.
It can then be switched on again.
After sales service
In the event of a fault that you cannot
easily remedy, please contact
– your Miele Dealer or
– the nearest Miele Service
Department. (See address on back
page).
Please note that telephone calls may
be monitored and recorded to
improve our service.

Problem solving guide / After sales Service

33