Problem Solving Guide / After Sales Service - Miele S 2110 Operating Instructions Manual

The vacuum cleaner switches off
automatically.
A temperature limiter switches the
vacuum cleaner off automatically if it
gets too hot.
This can occur if, for instance, large
articles block the suction tube or when
the filter bag is full or contains particles
of fine dust. A heavily soiled dust
compartment or exhaust filter can also
be the cause of overheating. Switch the
vacuum cleaner off immediately using
the On/Off foot control s. Disconnect
from the electricity supply. Switch off at
the wall socket and remove the plug.
After removing the cause, wait for
approx. 20 - 30 minutes to allow the
vacuum cleaner to cool down. It can
then be switched on again.

Problem solving guide / After sales service

After sales service
In the event of a fault that you cannot
easily remedy, please contact
– your Miele Dealer
or
– the nearest Miele Service
Department (see address on back
page).
21