Problem Solving Guide / After Sales Service - Miele S 5000 series Operating Instructions Manual

The vacuum cleaner switches off
automatically.
On certain models, the overheating
warning light also comes on.
A temperature limiter switches the
vacuum cleaner off automatically if it
gets too hot. Some models also have a
warning light , which comes on to
indicate that it has overheated.
This can occur if, for instance, large
articles block the suction tube or when
the filter bag is full or contains particles
of fine dust. A heavily soiled exhaust or
dust compartment filter can also be the
cause of overheating. Switch the
vacuum cleaner off immediately using
the On/Off foot control s. Disconnect
from the electricity supply. Switch off at
the wall socket and remove the plug.
After removing the cause, wait for
approximately 20 - 30 minutes to allow
the vacuum cleaner to cool down. It
can then be switched on again.
After sales service
In the event of a fault that you cannot
easily remedy, please contact
– your Miele Vacuum Cleaner
Specialist
or
– Miele.
See back cover for Miele's contact
details.

Problem solving guide / After sales service

33