Table of Contents
Advertisement
The vacuum cleaner switches off
automatically.
On certain models, the overheating
warning light also comes on.
A temperature limiter switches the
vacuum cleaner off automatically if it
gets too hot. Some models also have a
warning light , which comes on to
indicate that it has overheated.
This can occur if, for instance, large
articles block the suction tube or when
the filter bag is full or contains particles
of fine dust. A heavily soiled exhaust or
dust compartment filter can also be the
cause of overheating. Switch off the
vacuum cleaner using the On-Off
switch s. Disconnect from the
electricity supply. Switch off at the wall
socket and remove the plug.
After removing the cause, wait for
approx. 20 - 30 minutes to allow the
vacuum cleaner to cool down. It can
then be switched on again.
After sales service
In the event of a fault that you cannot
easily remedy, please contact
– your Miele dealer, or
– the nearest Miele Service
Department. (See address on back
page).
Please note that telephone calls may
be monitored and recorded for
training purposes.
Problem solving guide / After sales service
31
Advertisement
Table of Contents
