Replacing The Batteries - Toshiba Qosmio G10 User Manual

Replacing the batteries

1. Remove the battery holder by inserting a tool with a pointed tip such as
a pen into the eject hole located on the rear panel of the Remote
Controller.
2. Remove the battery from the battery holder.
3. Replace the battery with a new one. Reinstall the battery holder. Close
the Battery holder securely until it clicks.
User's Manual
Using the Remote Controller, AV Buttons and QosmioPlayer
Figure 8-15 Opening the battery holder
Figure 8-16 Removing the battery
Figure 8-17 Reinstalling the battery holder
Eject hole
Battery holder
Battery holder
Battery
Battery holder
8-25