Replacing The Batteries; Watching The Tv; Activating Media Center For The First Time; Changing Settings - Toshiba Qosmio G30 User Manual

Using the Remote Controller, Front operation button and QosmioPlayer

Replacing the batteries

When the batteries in the Remote Controller reach the end of their life, the
Remote Controller may not operate correctly or work only within a short
distance from your computer. In this instance, you should purchase new
batteries and replace the discharged ones.
1. Open the battery cover on the back side of the Remote Controller.
2. Replace the batteries.
Be sure to place the batteries with their polarities (+ and -) in the correct
position.
3. Close the battery cover.
Close the cover securely until it clicks.

Watching the TV

Activating Media Center for the first time

1. Activate Media Center.
The setup screen appears. Configure settings according to your
environment.
Follow the screen instructions and configure settings according to the
environment used.

Changing settings

Refer to the following procedures to change settings that are already
configured.
1. Activate Media Center.
2. Click in the following order: [Settings] -> [TV] -> [Set Up TV Signal].
3. Click [Yes] for the [TV SIGNAL SETUP] message.
4. Follow the screen instructions and configure settings according to the
environment used.
Image data cannot be imported, edited, watched or saved to DVD by
connecting the Media Center Edition model to external devices such as
TV, video deck or analog video camera.
8-14
Batteries
Figure 8-11 Removing the batteries
User's Manual